SIELCO EXC 5000 GT
Exciter SIELCO EXC 5000 GT/S, Stereo Coder has a good chance that the sound produced / ON AIR in the wider sound (stereo), audio is transmitted does not degrade quality, so LOW, MID and HIGH Frequency Audio sounds more clearly (CD Quality Sound).
EXC 5000GT model is the 5000W transmitter of the innovative GT family produced by Sielco. It is appreciated for the great efficiency and versatility due to three main reasons: LIGHT weight, MINIMUM size and LOW consumption. To buy an EXC 5000GT, as anyone other model of the GT line, means to make a winning choice, to enjoy all the relevant advantages during all the life of the product and to spare money: less transport costs, less needed space to install it and the lowest energy consumption during the work.
EXC 5000GT is simple to set up: very easy to configure thanks to the intuitive human interface equipped with an elegant LCD graphic display, a multifunction jog control and only a few other control buttons. The high flexibility of this exciter could be even increased through the use of important options like: telemetry/remote control systems through GSM net, Ethernet connection with SNMP protocol, high quality stereo encoder, audio digital board in accordance with AES/EBU directive and RS232/485 serial port to enable an easier integration with other instruments. The modern and attractive design of our GT transmitters reflects the state-of-the-art technology of this trustworthy model that requires a few maintenance and that allows to spare time and money. For all product life.
N.B. The amplifier RFB 5000GT needs an exciter like EXC 30GT.
The exciter together with the amplifier form the TX 5000GT
Frequency range from 87,5 to 108 MHz
FM modulation 75 KHz peak deviation (adjustable)
Audio and Mpx input level from -3,5 to +12,5 dBm @ 75 KHz deviation
Auxiliary input channel level
SCA from -12,5 to +3,5 dBm @ 7,5 KHz deviation
RDS from -24 to -8 dBm @ 2 KHz deviation
Modulation distortion 75 KHz deviation <0.05%, 0.02% typical
S/N ratio, mono
30÷20000Hz >76 dB, 80 typical
CCIR >75 dB, 79 typical
S/N ratio, stereo
30÷20000Hz >72 dB, 77 typical
CCIR >68 dB, 72 typical
Audio channels frequency response 30÷15000 Hz ±0.1 dB
Pre-emphasis time constant 25/50/75 μs selectable
Rated RF output power 5000W
Transmitter tuning steps 10/100 KHz
Output power ALC stability ±3%
Harmonic and spurious emissions <70dB (harmonic), <80 dBc (spurious)
RF output connector 7/8"
Single phase 230 Vac ± 15%
Three phase 230 or 400 Vac ± 15% with neutral line
Total consumption at rated RF power 7800W
Operative temperature range
suggested from 0 to 35 °C
extreme from -10 to +50 °C max (with derating)
Relative humidity up to 95% not condensing
Dimensions (WxHxD) 483x266x670 mm